16xGiga+4x Giga SFP, -40...+75C Industrial L3 Switch, IP30, 19''

SKU: PLANET-IGS-5225-16T4S
1250,00 €
Myyntihinta alennuksen kanssa
Myyntihinta ilman veroja: 996,02 €
Veron summa 253,98 €
Price / kg:
Tuotetta ei pidetä varastossa. Tilataan tarvittaessa suoraan valmistajalta.
Toimitusaika :
arvio 2-4 viikkoa. Erikoistilaustuote!
PLANET IGS-5225-16T4S on teollisuuskäyttöön suunniteltu 20-porttinen hallittava 19" Ethernet-kytkin laajennetulla käyttölämpötila-alueella. Kytkin on varustettu 16x 10/100/1000Base-T kupariportilla sekä 4x 100/1000M SFP- porteilla. Tekniset tiedot: – 16x
Tuotekoodi:PLANET-IGS-5225-16T4S
Valmistajan koodi:IGS-5225-16T4S
Tuotteen nimi:16xGiga+4x Giga SFP, -40...+75C Industrial L3 Switch, IP30, 19"
Tuoteryhmä:Teollisuus-Ethernet
Valmistaja:PLANET Technology
Takuuaika:24 kk
Lisätiedot:Tuotesivu
 Tuote-esite
 Ohjekirja

PLANET IGS-5225-16T4S on teollisuuskäyttöön suunniteltu 20-porttinen hallittava 19" Ethernet-kytkin laajennetulla käyttölämpötila-alueella. Kytkin on varustettu 16x 10/100/1000Base-T kupariportilla sekä 4x 100/1000M SFP- porteilla.

Tekniset tiedot: – 16x 10/100/1000BASE-T RJ45 copper – 4x 100/1000BASE-X mini-GBIC/SFP slots, compatible with 100BASE-FX SFP – RJ45 to RS232 DB9 console interface for basic management and setup – One 100 to 240VAC or dual 36 to 60V DC power input, redundant power with polarity reverse protection function
- Active-active redundant power failure protection
- Backup of catastrophic power failure on one supply
- Fault tolerance and resilience – 19-inch rack-mountable design – IP30 metal case – Supports 6000V DC Ethernet ESD protection – -40...+75C operating temperature for DC power input – -10...+60 degrees C operating temperature for AC power input – 2 Digital Input (DI) – 2 Digital Output (DO) – Integrates sensors into auto alarm system – Transfers alarm to IP network via email and SNMP trap – Supports maximum 32 static routes and route summarization – Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) – High performance of Store-and-Forward architecture, and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth – Storm control support
- Broadcast/Multicast/Unknown unicast – Supports VLAN
- IEEE 802.1Q tagged VLAN
- Up to 255 VLANs groups, out of 4095 VLAN IDs
- Provides Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
- Private VLAN Edge (PVE)
- Protocol-based VLAN
- MAC-based VLAN
- IP subnet-based VLAN
- Voice VLAN – Supports Spanning Tree Protocol
- IEEE 802.1D Spanning Tree Protocol (STP)
- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN
- BPDU Guard – Supports Link Aggregation
- 802.3ad Link Aggregation Control Protocol (LACP)
- Cisco ether-channel (static trunk)
- Maximum 10 trunk groups, with 8 ports for each trunk
- Up to 16Gbps bandwidth (full duplex mode) – Provides port mirror (many-to-1) – Port mirroring monitors the incoming or outgoing traffic on a particular port – Loop protection to avoid broadcast loops – Supports E.R.P.S. (Ethernet Ring Protection Switching) – IEEE 1588 and Synchronous Ethernet network timing (Port1 :12) – Ingress shaper and egress rate limit per port bandwidth control – 8x priority queues on all switch ports – Traffic classification
- IEEE 802.1p CoS
- ToS/DSCP/IP precedence of IPv4/IPv6 packets
- IP TCP/UDP port number
- Typical network application – Strict priority and Weighted Round Robin (WRR) CoS policies – Traffic-policing policies on the switch port – DSCP remarking – Supports IGMP snooping v1, v2 and v3 – Supports MLD snooping v1 and v2 – Querier mode support – IGMP snooping port filtering – MLD snooping port filtering – MVR (Multicast VLAN Registration) – Authentication
- IEEE 802.1x port-based/MAC-based network access authentication
- IEEE 802.1x authentication with guest VLAN
- Built-in RADIUS client to cooperate with the RADIUS servers
- RADIUS/TACACS+ users access authentication Access Control List
- IP-based Access Control List (ACL)
- MAC-based Access Control List (ACL) – Source MAC/IP address binding – DHCP Snooping to filter distrusted DHCP messages – Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding – IP Source Guard prevents IP spoofing attacks – IP address access management to prevent unauthorized intruder – IPv4 and IPv6 dual stack management – Switch Management Interfaces
- Console/Telnet command line interface
- Web switch management
- SNMP v1, v2c, and v3 switch management
- SSH/SSL secure access – IPv6 address/NTP management – Built-in Trivial File Transfer Protocol (TFTP) client – BOOTP and DHCP for IP address assignment – System Maintenance
- Firmware upload/download via HTTP/TFTP
- Reset button for system reboot or reset to factory default
- Dual images – DHCP relay and option 82 – User privilege levels control – NTP (Network Time Protocol) – Link Layer Discovery Protocol (LLDP) and LLDP-MED – Network diagnostic
- SFP-DDM (Digital Diagnostic Monitor)
- Cable diagnostic technology provides the mechanism to detect and report potential cabling issues
- ICMPv6/ICMPv4 remote ping – SMTP/Syslog remote alarm – Four RMON groups (history, statistics, alarms and events) – SNMP trap for interface link up and link down notification– System Log – PLANET Smart Discovery Utility for deployment management

24 kk
6.95
oldies