8xGiga + 2xSFP, -40...+75C Industrial Switch Managed, IP30

PLANET IGS-4215-8T2S on teollisuuskäyttöön suunniteltu hallittava Ethernet-kytkin laajennetulla käyttölämpötila- alueella. Kytkin on varustettu 8x 10/100/1000Base-T kupariportilla sekä 2x 100/1000M SFP-porteilla.

Tekniset tiedot: – 8x 10/100/1000BASE-T RJ45 with auto MDI/MDI-X function – 2x 100/1000BASE-X SFP transceiver type auto detection – Dual power input, redundant power with reverse polarity protection – 9...48VDC input or AC 24V input – Active-active redundant power failure protection – Backup of catastrophic power failure on one supply – Fault tolerance and resilience – IP30 metal case – DIN-rail and wall-mount designs – Supports ESD 6kVDC Ethernet protection – Supports -40...+75C operating temperature – Free fall, shock-proof and vibration-proof for industries – Features Store-and-Forward mode with wire-speed filtering and forwarding rates – IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation – 8k MAC address table size – 9k jumbo frame – Automatic address learning and address aging – Supports CSMA/CD protocol – Supports VLAN – IEEE 802.1Q tagged VLAN – Up to 256 VLAN groups, out of 4096 VLAN IDs – Provider bridging (VLAN Q-in-Q, IEEE 802.1ad) support – Private VLAN (Protected port) – Protocol-based VLAN – MAC-based VLAN – Voice VLAN – GVRP (GARP VLAN Registration Protocol) – Supports Spanning Tree Protocol – IEEE 802.1D Spanning Tree Protocol (STP) – IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) – IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN – BPDU Guard – Supports Link Aggregation – IEEE 802.3ad Link Aggregation Control Protocol (LACP) – Cisco ether-channel (static trunk) – Up to 3 trunk groups – Up to 6 ports per trunk group with 12Gbps bandwidth – Provides port mirror (many-to-1) – IPv6 MAC/VLAN/Multicast Address Table – Loop protection to avoid broadcast loops – Supports ERPS (Ethernet Ring Protection Switching) – Link Layer Discovery Protocol (LLDP) – Ingress/Egress Rate Limit per port bandwidth control – Support 8 priority queues on all switch ports – Traffic classification – IEEE 802.1p CoS – IP TOS/DSCP/IP precedence of IPv4/IPv6 packets – IP TCP/UDP port number – Typical network application – Strict priority and Weighted Round Robin (WRR) CoS policies – Supports QoS and In/Out bandwidth control on each port – Traffic-policing on the switch port – DSCP remarking – Supports IPv4 IGMP snooping v1, v2, v3 – Supports IPv6 MLD snooping v1, v2 – Querier mode support – IGMP snooping port filtering – MLD snooping port filtering – Storm Control support – Broadcast/Multicast/Unicast – Authentication – IEEE 802.1X port-based network access authentication – Built-in RADIUS client to cooperate with the RADIUS servers – DHCP Relay and DHCP Option 82 – RADIUS/TACACS+ users access authentication – Access Control List – IPv4/IPv6 IP-based ACL – IPv4/IPv6 IP-based ACE – MAC-based ACL – MAC-based ACE – MAC Security – Static MAC – MAC filtering – Port security for source MAC address entries filtering – DHCP snooping to filter distrusted DHCP messages – Dynamic ARP inspection discards ARP packets with invalid – MAC address to IP address binding – IP source guard prevents IP spoofing attacks – IP address access management to prevent unauthorized intruder – Management – IPv4 and IPv6 dual stack management – Switch Management Interface – IPv4/IPv6 Web switch management – Console and telnet Command Line Interface – SNMP v1, v2c, v3 – SSH, TLS secure access – IPv6 IP address/NTP/DNS management – Built-in Trivial File Transfer Protocol (TFTP) client – Static and DHCP for IP address assignment – System Maintenance – Firmware upload/download via HTTP/TFTP – Hardware reset button for system reboot or reset to factory default – Dual images – User Privilege levels control – Network Time Protocol (NTP) – Link Layer Discovery Protocol (LLDP) and LLDP-MED – Syslog remote alarm – SNMP Management – SNMP trap for interface link up and link down notification– Four RMON groups (history, statistics, alarms and events) – PLANET Smart Discovery Utility for deployment management – PLANET UNI-NMS (Universal Network Management) and Smart – Discovery Utility for deployment management – Network diagnostic – SFP-DDM (Digital Diagnostic Monitor) – Cable diagnostic technology provides the mechanism to detect and report potential cabling issues – ICMPv6 / ICMPv4 remote pin