4x 10/100/1000 + 2xSFP -40...+75C Industrial Switch, IP30

PLANET IGS-620TF on teollisuuskäyttöön soveltuva 6- porttinen 10/100/1000 (4x TX / 2x SFP) Ethernet- kytkin laajennetulla käyttölämpötila-alueella sekä DIN- kiskokiinnityksellä.

Tekniset tiedot: – 4x 10/100/1000Base-T RJ-45 with auto MDI / MDI-X function – 2x SFP slot interface, SFP supports 1000Base-X and 100Base-FX transceiver via DIP switch configured – Fiber Port Redundancy – Link status auto-detect and redundant on Dual ports with the same connector type – Only Primary-Port is active at a time, the Backup-Port is blocked – When Primary-Port link failure occurs, the traffic will swap to Backup-Port automatically. – Once the Primary-Port status is back to link-up, the traffic will swap from Backup-Port to Primary-Port. – Supports Auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode – High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth – Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control (Full-Duplex) – 9k Jumbo Frame Size support – Backplane (Switching Fabric): 12Gbps – Integrated address look-up engine, support 1K absolute MAC-addresses – Automatic address learning and address aging – CSMA/CD Protocol – Slim IP30 metal case protection – DIN Rail and Wall Mount Design – Redundant Power Design
- 12 to 48V DC, redundant power with polarity reverse protect function
- AC 24V power adapter acceptable – Supports EFT protection 6000 VDC for power line – Supports 6000 VDC Ethernet ESD protection – Käyttölämpötila-alue: -40...+75C