8xGiga+4x100/1000SFP, -40...+75C Industrial L3 Switch, SNMP, IP30

PLANET IGS-12040MT on teollisuuskäyttöön soveltuva 12- porttinen hallittava 10/100/1000 (8x TX + 4x 100/1000SFP) Ethernet-kytkin laajennetulla käyttölämpötila-alueella sekä DIN-kiskokiinnityksellä.

Tekniset tiedot: – 8-Port 10/100/1000BASE-T RJ45 copper – 100/1000BASE-X mini-GBIC/SFP slots, SFP type auto detection – One RJ45 console interface for basic management and setup – IP30 aluminum case protection – DIN-rail and wall-mount design – Redundant Power Design
- 12 to 72V DC, redundant power with polarity reverse protect function
- AC 24V power adapter acceptable – Supports EFT protection for 6000V DC power and 6000V DC – Ethernet ESD protection – -40 to 75 degrees C operating temperature – 2x Digital Input (DI) – 2x Digital Output (DO) – Integrates sensors into auto alarm system – Transfers alarm to IP network via email and SNMP trap – High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth – Storm Control support
- Broadcast / Multicast / Unknown Unicast – Supports VLAN
- IEEE 802.1Q tagged VLAN
- Up to 255 VLANs groups, out of 4095 VLAN IDs
- Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
- Private VLAN Edge (PVE)
- Protocol-based VLAN
- MAC-based VLAN
- Voice VLAN – Supports Spanning Tree Protocol
- STP, IEEE 802.1D Spanning Tree Protocol
- RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
- MSTP, IEEE 802.1s Multiple Spanning Tree Protocol by VLAN
- BPDU Guard – Supports Link Aggregation
- 802.3ad Link Aggregation Control Protocol (LACP)
- Cisco ether-channel (static trunk)
- Maximum 6 trunk groups, up to 8 ports per trunk group
- Up to 16Gbps bandwidth (duplex mode) – Provides port mirror (many-to-1) – Port Mirroring of the incoming or outgoing traffic on a particular port – Loop protection to avoid broadcast loops – Supports E.R.P.S. (Ethernet Ring Protection Switching) – IEEE 1588 and Synchronous Ethernet network timing – Ingress Shaper and Egress Rate Limit per port bandwidth control – 8x priority queues on all switch ports – traffic classification
- IEEE 802.1p CoS
- IP TOS / DSCP / IP Precedence
- IP TCP/UDP port number
- Typical network application – Strict priority and Weighted Round Robin (WRR) CoS policies – Supports QoS and In/Out bandwidth control on each port – Traffic-policing policies on the switch port – DSCP remarking – Supports IPv4 IGMP Snooping v1, v2 and v3 – Supports IPv6 MLD Snooping v1 and v2 – Querier mode support – IGMP Snooping port filtering – MLD Snooping port filtering – MVR (Multicast VLAN Registration) – Authentication
- IEEE 802.1x Port-based / MAC-based network access authentication
- Built-in RADIUS client to cooperate with the RADIUS servers
- TACACS+ login users access authentication
- RADIUS / TACACS+ users access authentication – Access Control List
- IP-based Access Control List (ACL)
- MAC-based Access Control List – Source MAC / IP address binding – DHCP Snooping to filter un-trusted DHCP messages – Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding – IP Source Guard prevents IP spoofing attacks – Auto DoS rule to defend DoS attack – IP address access management to prevent unauthorized intruder – Supports maximum 32 static routes and route summarization – IPv4 and IPv6 dual stack management – Switch Management Interfaces
- Console / Telnet Command Line Interface
- Web switch management
- SNMP v1, v2c, and v3 switch management
- SSH / SSL secure access – IPv6 IP Address / NTP / DNS management – Built-in Trivial File Transfer Protocol (TFTP) client – BOOTP and DHCP for IP address assignment – System Maintenance
- Firmware upload/download via HTTP / TFTP
- Reset button for system reboot or reset to factory default
- Dual Images – DHCP Relay and DHCP Option82 – User Privilege levels control – NTP (Network Time Protocol) – Link Layer Discovery Protocol (LLDP) and LLDP-MED – SFP-DDM (Digital Diagnostic Monitor) – Network Diagnostic
- ICMPv6 / ICMPv4 Remote Ping
- Cable Diagnostic technology provides the mechanism to detect and report potential cabling issues – SMTP / Syslog remote alarm – Four RMON groups (history, statistics, alarms and events) – SNMP trap for interfacing Link Up and Link Down notification – System Log – PLANET Smart Discovery Utility for deploy management