5x1000T@4x UltraPoE++, 2xSFP, Managed L3 -40...+75C, IP30, DI/DO, DIN

SKU: PLANET-IGS-5225-4UP1T2S
803,00 €
Myyntihinta alennuksen kanssa
Myyntihinta ilman veroja: 647,58 €
Veron summa 155,42 €
Price / kg:
Tuotetta ei pidetä varastossa. Tilataan tarvittaessa suoraan valmistajalta.
Toimitusaika :
arvio 2-4 viikkoa. Erikoistilaustuote!
PLANET IGS-5225-4UP1T2S on teollisuuskäyttöön suunniteltu 7-porttinen hallittava DIN-kiskoon asennettava Ultra PoE++ kytkin laajennetulla käyttölämpötila-alueella. Layer 3-tasonkytkin on varustettu 4x 10/100/1000Base-T Ultra PoE++, 1x 10/100/1000 kuparipo
Tuotekoodi:PLANET-IGS-5225-4UP1T2S
Valmistajan koodi:IGS-5225-4UP1T2S
Tuotteen nimi:5x1000T@4x UltraPoE++, 2xSFP, Managed L3 -40...+75C, IP30, DI/DO, DIN
Tuoteryhmä:Industrial PoE
Valmistaja:PLANET Technology
Takuuaika:24 kk
Lisätiedot:Tuotesivu
 Tuote-esite
 Ohjekirja

PLANET IGS-5225-4UP1T2S on teollisuuskäyttöön suunniteltu 7-porttinen hallittava DIN-kiskoon asennettava Ultra PoE++ kytkin laajennetulla käyttölämpötila-alueella. Layer 3-tasonkytkin on varustettu 4x 10/100/1000Base-T Ultra PoE++, 1x 10/100/1000 kupariportilla sekä 2x 100/1000 SFP-portilla.

Tekniset tiedot – 4x 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with 802.3bt PoE++ Injector function – 1x 10/100/1000BASE-T Gigabit Ethernet RJ45 port – 2x 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto detection – One RJ45 console interface for basic management and setup – 802.3bt Power over Ethernet – Complies with IEEE 802.3bt Power over Ethernet Plus Plus Type-4 PSE – Backward compatible with IEEE 802.3at/af PD device – Up to 4 ports of IEEE 802.3af/IEEE 802.3at/IEEE 802.3bt PoE++ devices powered – Supports PoE power up to 95 watts for each PoE port – Total of 240-watt PoE budget – Auto detects powered device (PD) – Circuit protection prevents power interference between ports – Remote power feeding up to 100m – PoE management features
- Total PoE power budget control
- Per port PoE function enable/disable
- PoE admin-mode control
- PoE port power feeding priority
- Per PoE port power limit
- PD classification detection – Intelligent PoE features
- Temperature threshold control
- PoE usage threshold control
- PD alive check
- PoE schedule – Industrial Case and Installation – IP30 aluminum case – DIN-rail or wall-mount design – 48...56VDC, redundant power with reverse polarity protection – Supports 6000VDC Ethernet ESD protection – -40...+75C operating temperature – Digital Input and Digital Output – 2x Digital Input (DI) – 2x Digital Output (DO) – Integrate sensors into auto alarm system – Transfer alarm to IP network via email and SNMP trap – Layer 2 Features – High performance of Store-and-Forward architecture, and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth – Storm Control support
- Broadcast/Multicast/Unicast Supports VLAN
- IEEE 802.1Q tagged VLAN
- Up to 255 VLANs groups, out of 4095 VLAN IDs
- Supports provider bridging (VLAN Q-in-Q IEEE 802.1ad)
- Private VLAN Edge (PVE)
- Protocol-based VLAN
- MAC-based VLAN
- Voice VLAN
- GVRP (GARP VLAN Registration Protocol) – Supports Spanning Tree Protocol
- IEEE 802.1D Spanning Tree Protocol (STP)
- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN
- BPDU Guard – Supports Link Aggregation
- 802.3ad Link Aggregation Control Protocol (LACP)
- Cisco ether-channel (static trunk)
- Maximum 3 trunk groups with 3 ports per trunk group
- Up to 6Gbps bandwidth (duplex mode) – Provides port mirror (1-to-1) – Port mirroring to monitor the incoming or outgoing trafficon a particular port – Loop protection to avoid broadcast loops – Supports G.8032 ERPS (Ethernet Ring Protection Switching) – Compatible with Cisco uni-directional link detection(UDLD)that monitors a link between two switches and blocks the ports on both ends of the link if the link fails at any point between the two devices – Link Layer Discovery Protocol (LLDP) – Layer 3 IP Routing Features – IPv4/IPv6 Layer 3 static routing – Supports maximum 32 software static routes and route summarization – Quality of Service – Ingress Shaper and Egress Rate Limit per port bandwidth control – 8x priority queues on all switch ports – Traffic classification
- IEEE 802.1p CoS
- IP TOS/DSCP/IP precedence
- IP TCP/UDP port number
- Typical network application – Strict priority and Weighted Round Robin (WRR) CoS policies – Supports QoS and In/Out bandwidth control on each port – Traffic-policing on the switch port – DSCP remarking – Multicast – Supports IPv4 IGMP snooping v1, v2 and v3 – Supports IPv6 MLD snooping v1 and v2 – Querier mode support – IPv4 IGMP snooping port filtering – IPv6 MLD snooping port filtering – MVR (Multicast VLAN Registration) – Security – Authentication
- IEEE 802.1X Port-based/MAC-based network access authentication
- Built-in RADIUS client to cooperate with the RADIUS servers
- TACACS+ login users access authentication
- RADIUS/TACACS+ users access authentication – Access Control Lit
- IP-based Access Control List (ACL)
- MAC-based Access Control List – Source MAC/IP address binding – DHCP snooping to filter distrusted DHCP messages – Dynamic ARP Inspection discards ARP packets with invalid – MAC address to IP address binding – IP Source Guard prevents IP spoofing attacks – IP address access management to prevent unauthorized intruder – Management – IPv4 and IPv6 dual stack management – Switch Management Interfaces
- Console/Telnet Command Line Interface
- Web switch management
- SNMP v1 and v2c switch management
- SSH/SSL and SNMP v3 secure access – SNMP Management
- Four RMON groups (history, statistics, alarms, and events)
- SNMP trap for interface Link Up and Link Down noticiation – IPv6 IP address/NTP/DNS management – Built-in Trivial File Transfer Protocol (TFTP) client – BOOTP and DHCP for IP address assignment – System Maintenance
- Firmware upload/download via HTTP
- Reset button for system reboot or reset to factory default
- Dual images – DHCP Relay – DHCP Option 82 – DHCP Server – User Privilege levels control – Network Time Protocol (NTP) – Network Diagnostic
- ICMPv6/ICMPv4 remote ping
- Cable diagnostic technology provides the mechanism to detect and report potential cabling issues
- SFP-DDM (Digital Diagnostic Monitor) – SMTP/Syslog remote alarm – System Log – PLANET Smart Discovery Utility for deployment management

Maahantuojan, Microdata Finland Oy:n, tuotteelle myöntämä takuu: 24 kk
Maahantuojan tekninen tuki, https://www.microdata.fi/tuki, auttaa myös teknisissä kysymyksissä jo ostopäätöstä tehtäessä, sekä avustaa tarvittaessa puhelimitse ja/tai sähköpostitse käytössä ja käyttöönotossa. Osoitteesta https://www.microdata.fi/ajurit/ ja löytyy tuotekohtaisia ajureita.
Alkaen 5.95 euroa postitse. Nouto arkisin 8:30-17 maahantuojan varastolta (osoitteesta Robert Huberin tie 2 E, 01510 VANTAA) 0.00 euroa.
oldies