8x10/100/1000 PoE+ 2xSFP 100/1000 -40...+75C Managed Industrial Switch, Flat

PLANET WGS-4215-8HP2S on teollisuuskäyttöön suunniteltu hallittava 10-porttinen 10/100/1000 Ethernet-kytkin, jonka kaikki (8x) Ethernet-kupariportit on varustettu PoE+ virransyöttötuella joista 4x lisäksi UltraPoE 802.3bt tuella. Kytkimessä on lisäksi 2x SFP-moduulipaikkaa ja se on varustettu laajennetulla käyttölämpötila-alueella (-40... +85C).

WGS-4215-8HP2S on rakenteeltaan matala-tyyppinen ("flat"), joten sen seinäasennus on vaivatonta. Laitteessa on myös DIN- sekä magneettikiinnitys mahdollisuudet, joten se saadaan asennettua kaikentyyppisiin koteloihin.

Tekniset tiedot:
• 4x 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE802.3bt PoE++ Injector function
• 4x 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE802.3at PoE+ Injector function
• 2x 100/1000BASE-X SFP slots for SFP type auto detection
• IP30 metal case
• Supports -40...+75C operating temperature
• Supports ESD 6KV DC Ethernet protection
• Slim size with fixed wall-mounted design
• Complies with IEEE 802.3bt Power over Ethernet Plus Plus and IEEE 802.3at Power over Ethernet Plus PSE
• Backward compatible with 802.3af PoE PSE
• Up to 4x IEEE 802.3bt devices powered
• Up to 8 IEEE 802.3af/802.3at devices powered
• Supports PoE power up to 95 watts for each PoE++ port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m
• Total PoE power budget control
• Per port PoE function enable/disable
• PoE admin-mode control
• PoE port power feeding priority
• Per PoE port power limit
• PD classification detection
• Sequence port PoE
• PoE extend mode control to support power feeding up to a distance of up to 160 meters
• PoE usage threshold control
• PD alive check
• PoE schedule
• Supports VLAN
• IEEE 802.1Q tagged VLAN
• Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
• Protocol VLAN
• Voice VLAN
• Management VLAN
• GVRP
• Supports Spanning Tree Protocol
• STP (Spanning Tree Protocol)
• RSTP (Rapid Spanning Tree Protocol)
• MSTP (Multiple Spanning Tree Protocol)
• STP BPDU Guard, BPDU Filtering and BPDU Forwarding
• Supports Link Aggregation
• IEEE 802.3ad Link Aggregation Control Protocol (LACP)
• Cisco ether-channel (static trunk)
• Maximum 1 trunk group, up to 2 ports per trunk group
• Provides port mirror (many-to-1)
• Loop protection to avoid broadcast loops
• Supports ERPS (Ethernet Ring Protection Switching)
• Link Layer Discovery Protocol (LLDP)
• Ingress/Egress Rate Limit per port bandwidth control
• Storm Control support
• Broadcast/Unknown-Unicast/Unknown-Multicast
• Traffic classification
• IEEE 802.1p CoS
• TOS/DSCP/IP Precedence of IPv4/IPv6 packets
• Strict priority and Weighted Round Robin (WRR) CoS policies
• Multicast
• Supports IPv4 IGMP snooping v2 and v3
• Supports IPv6 MLD snooping v1, v2
• IGMP querier mode support
• IGMP snooping port filtering
• MLD snooping port filtering
• Authentication
• IEEE 802.1X Port-based network access authentication
• Built-in RADIUS client to co-operate with the RADIUS servers
• RADIUS/TACACS+ login user access authentication
• Access Control List
• IPv4/IPv6 IP-based ACL/ACE
• MAC-based ACL/ACE
• MAC Security
• Static MAC
• MAC Filtering
• Port Security for Source MAC address entries filtering
• DHCP Snooping to filter distrusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid
• MAC address to IP address binding
• IP Source Guard prevents IP spoofing attacks
• DoS Attack Prevention
• Management
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
• Telnet Command Line Interface
• Web switch management
• SNMP v1, v2c, and v3 switch management
• SSHv2 and TLSv1.2 secure access
• SNMP Management
• Four RMON groups (history, statistics, alarms, and events)
• SNMP trap for interface Link Up and Link Down notification
• User Privilege Levels Control
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance
• Firmware upload/download via HTTP/TFTP
• Configuration upload/download via HTTP/TFTP
• Dual Images
• Hardware reset button for system reboot or reset to factory default
• SNTP Network Time Protocol
• Link Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
• SNMP trap for interface Link Up and Link Down notification
• Event message logging to remote Syslog server
• Four RMON groups (history, statistics, alarms, and events)
• Network Diagnositc
• ICMPv6/ICMPv4 Ping Test
• Cable diagnostic technology provides the mechanism to detect and report potential cabling issues
• SFP-DDM (Digital Diagnostic Monitor)
• PLANET UNI-NMS (Universal Network Management) and Smart Discovery Utility for deployment management