PLANET SGS-6341-24P4X on hallittava ja pinottava L3-tason Ethernet-kytkin 24x 10/100/1000 PoE+ kupariportilla, 4x jaetulla SFP-moduulipaikalla sekä 4x 10 Gigasella SFP+ moduulipaikalla. Kytkimen tarjoama PoE budjetti on 370W.
Tekniset tiedot: • 24x 10/100/1000BASE-T Gigabit Ethernet RJ45 with 24-port IEEE 802.3at/af PoE injector • 4x 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE- SX/LX/BX SFP • RJ45 to DB9 console interface for switch basic management and setup • Power over Ethernet - Complies with IEEE 802.3at Power over Ethernet Plus, end- span PSE - Backward compatible with IEEE 802.3af Power over Ethernet - Up to 24 ports of IEEE 802.3af/802.3at devices powered - Supports PoE power up to 30 watts for each PoE port - Auto detects powered device (PD) - Circuit protection prevents power interference between ports - Remote power feeding up to 100 meters • PoE management - Total PoE power budget control - Per port PoE function enable/disable - PoE port power feeding priority - Per PoE port power limitation - PD classification detection - PoE schedule • IP Stacking - Connects with stack member via both Gigabit TP and SFP interfaces - Single IP address management, supporting up to 24 units stacked together • IP Routing Features - IP routing protocol supports RIPv1/v2, RIPng, OSPFv2/v3, BGP4/4+ - Routing interface provides per VLAN routing mode - VRRPv1/v3 protocol for redundant routing deployment - Supports route redistribution • Multicast Routing Features - Supports PIM-DM (Protocol Independent Multicast - Dense Mode) and PIM-SM (Protocol Independent Multicast - Sparse Mode) and PIM-SSM (Protocol Independent Multicast - Source Specific Multicast) - Supports DVMRP (Distance Vector Multicast Routing Protocol) - Supports IGMP v1/v2/v3 and MLD v1/v2 • Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit Ethernet standard • Supports auto-negotiation and half-duplex/full-duplex modes for all 10BASE-T, 100BASE-TX and 1000BASE-T ports • Auto-MDI/MDI-X detection on each RJ45 port • Prevents packet loss flow control - IEEE 802.3x pause frame flow control in full-duplex mode - Back-pressure flow control in half-duplex mode • High performance Store-and-Forward architecture, broadcaststorm control, port loopback detect • 16k MAC address table, automatic source address learning and aging • Supports VLAN - IEEE 802.1Q tag-based VLAN - GVRP for dynamic VLAN management - Up to 256 VLANs groups, out of 4041 VLAN IDs - Provider Bridging (VLAN Q-in-Q, IEEE 802.1ad) supported - Private VLAN Edge (PVE) supported - GVRP protocol for Management VLAN - Protocol-based VLAN - MAC-based VLAN - IP subnet VLAN • Supports Link Aggregation - Maximum 12 trunk groups, up to 8 ports per trunk group - IEEE 802.3ad LACP (Link Aggregation Control Protocol) - Cisco ether-channel (static trunk) • Supports Spanning Tree Protocol - STP, IEEE 802.1D (Classic Spanning Tree Protocol) - RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol) - MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol, spanning tree by VLAN) - Supports BPDU & root guard • Port mirroring to monitor the incoming or outgoing trafficon a particular port (many to many) • Provides port mirror (many-to-1) • Supports G.8032 ERPS (Ethernet Ring Protection Switching) • Quality of Service - 8x priority queues on all switch ports - Support for strict priority and WRR (Weighted Round Robin) - CoS policies • Traffic classification - IEEE 802.1p CoS/ToS - IPv4/IPv6 DSCP - Port-based WRR • Strict priority and WRR CoS policies • Multicast - Supports IPv4 IGMP snooping v1, v2 and v3; IPv6 MLD v1 andv2 snooping - Querier mode support - Supports Multicast VLAN Register (MVR) • Security - IEEE 802.1x port-based network access authentication - MAC-based network access authentication - Built-in RADIUS client to cooperate with the RADIUS servers for IPv4 and IPv6 - TACACS+ login users access authentication - IP-based Access Control List (ACL) - MAC-based Access Control List - Supports DHCP snooping - Supports ARP inspection - IP Source Guard prevents IP spoofing attacks - Dynamic ARP Inspection discards ARP packets with invalid - MAC address to IP address binding • Management IP for IPv4 and IPv6 • Switch Management Interface - Console/Telnet Command Line Interface - Web switch management - SNMP v1, v2c, and v3 switch management - SSH/SSL secure access • BOOTP and DHCP for IP address assignment • Firmware upload/download via TFTP or HTTP Protocol for IPv4 and IPv6 • SNTP (Simple Network Time Protocol) for IPv4 and IPv6 • User privilege levels control • Syslog server for IPv4 and IPv6 • Supports DDM • Four RMON groups 1, 2, 3, 9 (history, statistics, alarms and events) • Supports sFlow • Supports ULDP • Supports ULPP (Uplink Protection Protocol) • Supports ULSM (Uplink State Monitor protocol) • Supports LLDP/LLDP MED • Supports DHCP Option82, Option37/38 • Supports ping, trace route function for IPv4 and IPv6 |