PLANET WGSW-24040HP4 on 24-porttinen SNMP-hallittava High PoE-kytkin (802.3at/af @ 440W), jossa kaikki 24x 10/100/1000-T porttia ovat varustettu PoE+ virransyöttötuella. Kytkimessä on lisäksi 4x jaettua SFP- moduulipaikkaa valokuitumoduleille.
Kytkin on varustettu PoE-syöttövirran hallintaominaisuudella (Alive check), joka mahdollistaa jumiutuneen PoE-päätelaitteen (IP-kamera, WLAN-tukiasema, IP-puhelin) resetoinnin automaattisella virtakatkoksella.
Tekniset tiedot: • 24x 10/100/1000Base-T RJ-45 copper with IEEE 802.3at/802.3af Power over Ethernet Injector function • 4x 100/1000Base-SX/LX DDM SFP shared interfaces • 1x RS-232 DB9 console interface
Power over Ethernet: • Complies with IEEE 802.3at High Power over Ethernet End- Span PSE • Complies with IEEE 802.3af Power over Ethernet End-Span PSE • Up to 24 ports of IEEE 802.3at/802.3af devices powered • Supports PoE power up to 30.8 watts for each PoE port • Auto detects powered device (PD) • Circuit protection prevents power interference between ports • Remote power feeding up to 100m • PoE Management – Total PoE power budget control – Per port PoE function enable/disable – PoE port power feeding priority – Per PoE port power limit – PD classification detection – PD alive-check – PoE schedule – PD power recycling schedule
Layer2 Features: • Prevents packet loss with back pressure (half-duplex) and • IEEE 802.3x pause frame flow control (full-duplex) • High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth • Storm Control support – Broadcast/Multicast/Unknown unicast • Supports VLAN – IEEE 802.1Q Tagged VLAN – Up to 255 VLANs groups, out of 4094 VLAN IDs – Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad) – Private VLAN Edge (PVE) – Protocol-based VLAN – MAC-based VLAN – Voice VLAN • Supports Spanning Tree Protocol – STP, IEEE 802.1D Spanning Tree Protocol – RSTP, IEEE 802.1w Rapid Spanning Tree Protocol – MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN – BPDU Guard • Supports Link Aggregation – 802.3ad Link Aggregation Control Protocol (LACP) – Cisco ether-channel (Static Trunk) – Maximum 10 trunk groups, up to 16 ports per trunk group – Up to 32Gbps bandwidth (Full Duplex Mode) • Provides Port Mirror (many-to-1) • Port Mirroring to monitor the incoming or outgoing trafficon a particular port • Loop protection to avoid broadcast loops
Quality of Service: • Ingress Shaper and Egress Rate Limit per port bandwidth control • 8x priority queues on all switch ports Traffic classification – IEEE 802.1p CoS – TOS / DSCP / IP Precedence of IPv4/IPv6 packets – IP TCP/UDP port number – Typical network application • Strict priority and Weighted Round Robin (WRR) CoS policies • Supports QoS and In/Out bandwidth control on each port • Traffic-policing policies on the switch port • DSCP remarking
Multicast: • Supports IGMP Snooping v1, v2 and v3 • Supports MLD Snooping v1 and v2 • Querier mode support • IGMP Snooping port filtering • MLD Snooping port filtering • Multicast VLAN Registration (MVR) support
Security: • IEEE 802.1x Port-based / MAC-based network access authentication • Built-in RADIUS client to co-operate with the RADIUS servers • TACACS+ login users access authentication • RADIUS / TACACS+ users access authentication • IP-based Access Control List (ACL) • MAC-based Access Control List • Source MAC / IP address binding • DHCP Snooping to filter un-trusted DHCP messages • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding • IP Source Guard prevents IP spoofing attacks • Auto DoS rule to defend DoS attack • IP address access management to prevent unauthorized intruder
Management • Switch Management Interfaces – Console / Telnet Command Line Interface – Web switch management – SNMP v1, v2c, and v3 switch management – SSH / SSL secure access • Four RMON groups (history, statistics, alarms, and events) • IPv6 IP Address / NTP / DNS management • Built-in Trivial File Transfer Protocol (TFTP) client • BOOTP and DHCP for IP address assignment • Firmware upload/download via HTTP / TFTP • DHCP Relay • DHCP Option82 • User Privilege levels control • NTP (Network Time Protocol) • Link Layer Discovery Protocol (LLDP) Protocol • Cable Diagnostic technology provides the mechanism to detect and report potential cabling issues • Reset button for system reboot or reset to factory default • PLANET Smart Discovery Utility for deploy management • ICMPv6
|