PLANET GS-5220-16S8CR on hallittava L3-tason Ethernet- kytkin varmennetulla virtalähteellä. 19″ räkkiasennettavan kytkin on varustettu 24x 100/1000 SFP moduulipaikalla sekä 8×10/100/1000Base-T jaetuilla kupariporteilla sekä 4 10G SFP+ portilla.

Tuotepakkauksessa kytkimen lisäksi virtajohto, asennusohje, RS-232 konsolikaapeli sekä 19″ räkkikiinnikkeet.

Tekniset tiedot:
• 24x 100/1000Base-X mini-GBIC/SFP slots
• 8-port 10/100/1000Base-T Gigabit Ethernet RJ-45, shared with Port-1 to Port-8
• 4x 10GBASE-SR/LR SFP+ interfaces (Ports XG1 to XG4) Backward compatible with 100M/1G/2.5GBASE-SX/LX/BX transceiver
• RJ45 to RS-232 DB9 console interface for basic management and setup
• Prevents packet loss with back pressure (half-duplex) and
• IEEE 802.3x pause frame flow control (full-duplex)
• High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
• Storm Control support
– Broadcast / Unicast / Unknown Unicast
• Supports VLAN
– IEEE 802.1Q tagged VLAN
– Up to 255 VLANs groups, out of 4095 VLAN IDs
– Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
– Private VLAN Edge (PVE)
– Protocol-based VLAN
– MAC-based VLAN
– IP Subnet-based VLAN
– Voice VLAN
• Supports Spanning Tree Protocol
– STP, IEEE 802.1D Spanning Tree Protocol
– RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
– MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN
– BPDU Guard
• Supports Link Aggregation
– 802.3ad Link Aggregation Control Protocol (LACP)
– Cisco ether-channel (Static Trunk)
– Maximum 12 trunk groups, up to 8 ports per trunk group
– Up to 16Gbps bandwidth (full duplex mode)
• Provides Port Mirror (many-to-1)
• Loop protection to avoid broadcast loops
• Supports maximum 128 static routes and route summarization
• Ingress Shaper and Egress Rate Limit per port bandwidth control
• 8 priority queues on all switch ports
• Traffic classification
– IEEE 802.1p CoS
– TOS / DSCP / IP Precedence of IPv4/IPv6 packets
– IP TCP/UDP port number
– Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS policies
• Traffic-policing policies on the switch port
• DSCP remarking
• Supports IGMP Snooping v1, v2 and v3
• Supports MLD Snooping v1 and v2
• Querier mode support
• IGMP Snooping port filtering
• MLD Snooping port filtering
• MVR (Multicast VLAN Registration)
• IEEE 802.1X Authentication with Guest VLAN
• Built-in RADIUS client to cooperate with the RADIUS servers
• RADIUS / TACACS+ users access authentication
• IP-based Access Control List (ACL)
• MAC-based Access Control List (ACL)
• Source MAC / IP address binding
• DHCP Snooping to filter distrusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid MAC
• address to IP address binding
• IP Source Guard prevents IP spoofing attacks
• IP address access management to prevent unauthorized intruder
• Switch Management Interfaces
– Console / Telnet Command Line Interface
– Web switch management
– SNMP v1, v2c, and v3 switch management
– SSH / SSL secure access
• Four RMON groups (history, statistics, alarms and events)
• IPv6 Address / NTP management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• Firmware upload / download via HTTP / TFTP
• DHCP Relay and Option 82
• User Privilege levels control
• NTP (Network Time Protocol)
• Link Layer Discovery Protocol (LLDP)
• SFP-DDM (Digital Diagnostic Monitor)
• Cable Diagnostic technology provides the mechanism to detect and report potential cabling issues for TP ports
• ICMPv6 / ICMPv4 Remote Ping
• Reset button for system reboot or reset to factory default
• SMTP / Syslog / SNMP Trap remote alarm
• System Log
• PLANET Smart Discovery Utility for deploy management
• Redundant Power System
– Redundant 100…240VAC / 36-60V DC dual power
– Active-active redundant power failure protection
– Backup of catastrophic power failure on one supply
– Fault tolerance and resilience