PLANET IGS-12040MT on teollisuuskäyttöön soveltuva 12- porttinen hallittava L3-tason staattisella reitityksellä varustettu 10/100/1000 (8x TX + 4x 100/1000SFP) Ethernet- kytkin laajennetulla käyttölämpötila-alueella, sekä DIN- kiskokiinnityksellä.

Tekniset tiedot:
• 8-Port 10/100/1000BASE-T RJ45 copper
• 100/1000BASE-X SFP slots, SFP type auto detection
• One RJ45 console interface for basic management and setup
• IP30 aluminum case protection
• DIN-rail and wall-mount design
• Redundant Power Design
– 12 to 72V DC, redundant power with polarity reverse protect function
– AC 24V power adapter acceptable
• Supports EFT protection for 6000V DC power and 6000V DC
• Ethernet ESD protection
• -40…+75C operating temperature
• 2x Digital Input (DI)
• 2x Digital Output (DO)
• Integrates sensors into auto alarm system
• Transfers alarm to IP network via email and SNMP trap
• High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
• Storm Control support
– Broadcast / Multicast / Unknown Unicast
• Supports VLAN
– IEEE 802.1Q tagged VLAN
– Up to 255 VLANs groups, out of 4095 VLAN IDs
– Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
– Private VLAN Edge (PVE)
– Protocol-based VLAN
– MAC-based VLAN
– Voice VLAN
• Supports Spanning Tree Protocol
– STP, IEEE 802.1D Spanning Tree Protocol
– RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
– MSTP, IEEE 802.1s Multiple Spanning Tree Protocol by VLAN
– BPDU Guard
• Supports Link Aggregation
– 802.3ad Link Aggregation Control Protocol (LACP)
– Cisco ether-channel (static trunk)
– Maximum 6 trunk groups, up to 8 ports per trunk group
– Up to 16Gbps bandwidth (duplex mode)
• Provides port mirror (many-to-1)
• Port Mirroring of the incoming or outgoing traffic on a particular port
• Loop protection to avoid broadcast loops
• Supports E.R.P.S. (Ethernet Ring Protection Switching)
• IEEE 1588 and Synchronous Ethernet network timing
• Ingress Shaper and Egress Rate Limit per port bandwidth control
• 8x priority queues on all switch ports
• traffic classification
– IEEE 802.1p CoS
– IP TOS / DSCP / IP Precedence
– IP TCP/UDP port number
– Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS policies
• Supports QoS and In/Out bandwidth control on each port
• Traffic-policing policies on the switch port
• DSCP remarking
• Supports IPv4 IGMP Snooping v1, v2 and v3
• Supports IPv6 MLD Snooping v1 and v2
• Querier mode support
• IGMP Snooping port filtering
• MLD Snooping port filtering
• MVR (Multicast VLAN Registration)
• Authentication
– IEEE 802.1x Port-based / MAC-based network access authentication
– Built-in RADIUS client to cooperate with the RADIUS servers
– TACACS+ login users access authentication
– RADIUS / TACACS+ users access authentication
• Access Control List
– IP-based Access Control List (ACL)
– MAC-based Access Control List
• Source MAC / IP address binding
• DHCP Snooping to filter un-trusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
• IP Source Guard prevents IP spoofing attacks
• Auto DoS rule to defend DoS attack
• IP address access management to prevent unauthorized intruder
• Supports maximum 32 static routes and route summarization
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
– Console / Telnet Command Line Interface
– Web switch management
– SNMP v1, v2c, and v3 switch management
– SSH / SSL secure access
• IPv6 IP Address / NTP / DNS management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance
– Firmware upload/download via HTTP / TFTP
– Reset button for system reboot or reset to factory default
– Dual Images
• DHCP Relay and DHCP Option82
• User Privilege levels control
• NTP (Network Time Protocol)
• Link Layer Discovery Protocol (LLDP) and LLDP-MED
• SFP-DDM (Digital Diagnostic Monitor)
• Network Diagnostic
– ICMPv6 / ICMPv4 Remote Ping
– Cable Diagnostic technology provides the mechanism to detect and report potential cabling issues
• SMTP / Syslog remote alarm
• Four RMON groups (history, statistics, alarms and events)
• SNMP trap for interfacing Link Up and Link Down notification
• System Log
• PLANET Smart Discovery Utility for deploy management
• Power Consumption:
– 6.5W / 22.18BTU (System on)
– 12W / 40.95BTU (Full load)
• Dimensions: 76.8×107.3x152mm
• Weight: 1010g
• Compliance: FCC Part 15 Class A, CE