PLANET IGS-620TF on teollisuuskäyttöön soveltuva 6- porttinen 10/100/1000 (4x TX / 2x SFP) Ethernet- kytkin laajennetulla käyttölämpötila-alueella sekä DIN- kiskokiinnityksellä.

Tekniset tiedot:
• 4x 10/100/1000Base-T RJ-45 with auto MDI / MDI-X function
• 2x SFP slot interface, SFP supports 1000Base-X and 100Base-FX transceiver via DIP switch configured
• Fiber Port Redundancy
• Link status auto-detect and redundant on Dual ports with the same connector type
• Only Primary-Port is active at a time, the Backup-Port is blocked
• When Primary-Port link failure occurs, the traffic will swap to Backup-Port automatically.
• Once the Primary-Port status is back to link-up, the traffic will swap from Backup-Port to Primary-Port.
• Supports Auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
• High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
• Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control (Full-Duplex)
• 9k Jumbo Frame Size support
• Backplane (Switching Fabric): 12Gbps
• Integrated address look-up engine, support 1K absolute MAC-addresses
• Automatic address learning and address aging
• CSMA/CD Protocol
• Slim IP30 metal case protection
• DIN Rail and Wall Mount Design
• Redundant Power Design
– 12 to 48V DC, redundant power with polarity reverse protect function
– AC 24V power adapter acceptable
• Supports EFT protection 6000 VDC for power line
• Supports 6000 VDC Ethernet ESD protection
• Käyttölämpötila-alue: -40…+75C
• Dimensions: 32×87.8x135mm
• Weight: 425g
• Compliance: FCC Part 15 Class A, CE