PLANET IGSW-24040T on teollisuuskäyttöön soveltuva 24- porttinen 19″ hallittava 10/100/1000 (24x TP @ 4x TP/SFP) Ethernet-kytkin laajennetulla käyttölämpötila-alueella.

Tekniset tiedot:
• 24x 10/100/1000Base-T Gigabit Ethernet RJ-45
• 4x 100/1000Base-SX/LX SFP slots, shared with Port-21 to Port-24
• RS-232 DB9 console interface for Switch basic management and setup
• Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control (Full-Duplex)
• High performance of Store-and-Forward architecture, broadcast storm control and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
• Storm Control support
– Broadcast / Multicast / Unknown-Unicast
• Supports VLAN
– IEEE 802.1Q Tagged VLAN
– Up to 255 VLAN groups, out of 4094 VLAN IDs
– Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
– Private VLAN Edge (PVE)
– Voice VLAN
• Supports Spanning Tree Protocol
– STP, IEEE 802.1D Spanning Tree Protocol
– RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
– MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN
– BPDU Guard
• Supports Link Aggregation
– 802.3ad Link Aggregation Control Protocol (LACP)
– Cisco ether-channel (Static Trunk)
– Maximum 12 trunk groups, up to 16 ports per trunk group
– Up to 16Gbps bandwidth (Duplex Mode)
• Provides Port Mirror (many-to-1)
• Port Mirroring to monitor the incoming or outgoing traffic on a particular port
• Ingress Shaper and Egress Rate Limit per port bandwidth control
• 4 priority queues on all switch ports
• Traffic classification
– IEEE 802.1p CoS
– TOS / DSCP / IP Precedence of IPv4/IPv6 packets
– IP TCP/UDP port number
– Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS policies
• Supports QoS and In/Out bandwidth control on each port
• Traffic-policing policies on the switch port
• QoS Control List Wizard makes QoS creation and configuration easier and more quickly
• DSCP remarking
• Supports IGMP Snooping v1, v2 and v3
• IGMP Snooping port filtering
• Querier mode support
• Multicast VLAN Registration (MVR) support
• IEEE 802.1x Port-Based / MAC-Based network access authentication
• Built-in RADIUS client to co-operate with the RADIUS servers
• TACACS+ login users access authentication
• RADIUS / TACACS+ users access authentication
• IP-Based Access Control List (ACL)
• MAC-Based Access Control List
• Source MAC / IP address binding
• DHCP Snooping to filter un-trusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
• IP Source Guard prevents IP spoofing attacks
• Auto DoS rule to defend DoS attack
• IP address access management to prevent unauthorized intruder
• Switch Management Interfaces
– Console / Telnet Command Line Interface
– Web switch management
– SNMP v1, v2c, and v3 switch management
– SSH / SSL secure access
• Four RMON groups (history, statistics, alarms, and events)
• IPv6 IP Address / NTP / DNS management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• Firmware upload / download via HTTP / TFTP
• DHCP Relay and Option 82
• User Privilege levels control
• NTP (Network Time Protocol)
• Link Layer Discovery Protocol (LLDP) Protocol
• Cable Diagnostic technology provides the mechanism to detect and report potential cabling issues
• Reset button for system reboot or reset to factory default
• PLANET Smart Discovery Utility for deploy management
• ICMPv6
• Digital Input / Digital Output
• Fault Alarm
• SMTP / Syslog / SNMP Trap remote alarm
• System Log
• 100…240VAC / +36…+72VDC Dual power redundant
• Active-active redundant power failure protection
• Backup of catastrophic power failure on one supply
• Fault tolerance and resilience
• 2 Digital Input (DI)
• 2 Digital Output (DO)
• Integrates sensors into auto alarm system
• Transfers alarm to IP network via email and SNNP trap