PLANET IGT-900-2T2S on hallittava teollisuuskäyttöön tarkoitettu mediamuunnin kahdella 10/100/1000Base-T Ethernet-kupariportilla sekä kahdella 100/1000/2500Base-X SFP-moduulipaikalla.

Layer 3 reititysominaisuuksilla varustettu mediamuunnin on varustettu lisäksi monipuolisilla hallinta- ja tietoturva- ominaisuuksilla sekä laajennetulla käyttölämpötila-alueella, joten se soveltuu hyvin vaativimpiin operaattoritason sekä teollisuuden tuotantoympäristöihin.

Tekniset tiedot:
• 2x 10/100/1000BASE-T Gigabit Ethernet RJ45 port
• 2x 100/1000/2500BASE-X SFP port for SFP type auto detection
• Modbus TCP for real-time monitoring in the SCADA system
• IEEE 1588v2 PTP (Precision Time Protocol) transparent clock mode
• IP30 metal case
• DIN-rail or wall-mount design
• 24VAC, 9…48VDC, redundant power with reverse polarity protection
• Supports 6KVDC Ethernet ESD protection
• -40…+75C operating temperature
• Supports maximum 32 static routes and route summarization
• Routing interface provides per VLAN routing mode
• Storm Control support
• Broadcast/Multicast/Unicast
• Supports VLAN:
– IEEE 802.1Q tagged VLAN
– Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad)
– Private VLAN Edge (PVE)
– Port Isolation
– MAC-based VLAN
– IP Subnet-based VLAN
– Protocol-based VLAN
– VLAN Translation
– Voice VLAN
– GVRP
• Supports Spanning Tree Protocol:
– IEEE 802.1D Spanning Tree Protocol (STP)
– IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
– IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN
– BPDU Filtering/BPDU Guard
• Supports Link Aggregation:
– 802.3ad Link Aggregation Control Protocol (LACP)
– Cisco ether-channel (static trunk)
– Maximum 2 trunk groups with 2 ports per trunk group
– Up to 5Gbps bandwidth (duplex mode)
• Provides port mirror (many-to-1)
• Port mirroring to monitor the incoming or outgoing trafficon a particular port
• Loop protection to avoid broadcast loops
• Supports ERPS (Ethernet Ring Protection Switching)
• Compatible with Cisco Uni-directional link detection (UDLD) that monitors a link between two switches and blocks the ports on both ends of the link if the link fails at any point between the two devices
• Link Layer Discovery Protocol (LLDP)
• IEEE 802.3ah OAM
• The IGT-900-1T1S supports one group (TP Port 1 and SFP Port 2) LFP function.
• The IGT-900-2T2S supports two groups (TP Port 1 and SFP Port 3, TP Port 2 and SFP Port 4) LFP function.
• Ingress Shaper and Egress Rate Limit per port bandwidth control
• 8x priority queues on all switch ports
• Traffic classification:
– IEEE 802.1p CoS
– IP TOS/DSCP/IP precedence
– IP TCP/UDP port number
– Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS policies
• Supports QoS and In/Out bandwidth control on each port
• Traffic-policing on the switch port
• DSCP remarking
• Supports IPv4 IGMP snooping v1, v2 and v3
• Supports IPv6 MLD snooping v1 and v2
• Querier mode support
• IPv4 IGMP snooping port filtering
• IPv6 MLD snooping port filtering
• MVR (Multicast VLAN Registration)
• Authentication:
– IEEE 802.1x port-based/MAC-based network access authentication
– Built-in RADIUS client to co-operate with the RADIUS servers
– TACACS+ login users access authentication
– RADIUS / TACACS+ users access authentication
– Guest VLAN assigns clients to a restricted VLAN with limited services
• Access Control List:
– IP-based Access Control List (ACL)
– MAC-based Access Control List
• Source MAC/IP address binding
• DHCP Snooping to filter un-trusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
• IP Source Guard prevents IP spoofing attacks
• IP address access management to prevent unauthorized intruder
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces:
– Web switch management
– Telnet Command Line Interface
– SNMP v1 and v2c switch management
– SSHv2, TLSv1.2 and SNMP v3 secure access
• SNMP Management:
– Four RMON groups (history, statistics, alarms, and events)
– SNMP trap for interface Link Up and Link Down notification
• IPv6 IP Address/NTP/DNS management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance:
– Firmware upload/download via HTTP
– Reset button for system reboot or reset to factory default
– Dual Images
• DHCP Relay and DHCP Option82
• DHCP Server
• User Privilege levels control
• NTP (Network Time Protocol)
• UPnP
• Network Diagnostic:
– ICMPv6/ICMPv4 Remote Ping
– Cable Diagnostic technology provides the mechanism to detect and report potential cabling issues
– SFP-DDM (Digital Diagnostic Monitor)
• SMTP, Syslog and SNMP trap remote alarm
• Local system Log
• PLANET Smart Discovery Utility for deployment management
• PLANET NMS system and CloudViewer for deployment management
• Power Requirements:
– Dual 9…48VDC, 24VAC
– Power Consumption:
– AC Input: Max. 10W / 24BTU (Ethernet Full Load)
– DC Input: Max. 6.5W / 24BTU (Ethernet Full Load)
• Dimensions: 32 x 87.8 x 135mm
• Weight: 390g
• Compliance: FCC Part 15 Class A, CE