KAM-136 on 433MHz langattomalla taajuudella toimiva vastaanotin releohjauksella. Vastaanottimeen voidaan parittaa 433MHz taajuudella toimivia antureita ja kauko- ohjaimia, joiden liipaisemana vastaanottimen relettä saadaanohjattua.

Tekniset tiedot:
• Input Voltage: 12VCD
• RF working mode: Superheterodyne
• Receiver sensitivity:>97 dBm
• Transmitting distance:>100m ( open space)
• Decoding mode: MCU software decoding
• Remote storage: 20x
• Support remote type: EV1527 learning code
• Working mode: Momentary, toggle, latching time delay (5s, 10s, 15s)
• Output terminal: NO, NC, COM

• Inching learning method: Press the code pairing button on the control panel once, andthe LED indicator will flash once. After the LED indicatorlit, press the button you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.

• Self-locking learning method: Press the code pairing button on the control panel twice, and the LED indicator will flash twice. After the LED indicatorlit, press the button you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.

• Mutual lock learning method: Press the code pairing button on the control panel three times, and the LED indicator will flash three times. After the LED indicatorlit, press the button you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.

• 5S delay learning method: Press the code pairing button on the control panel four times, and the LED indicator will flash four times. After the LED indicatorlit, press the button you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.

• 10S delay learning method: Press the code pairing button on the control panel five times, and the LED indicator will flash five times. After the LED indicatorlit, press the button you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.

• 15S delay learning method: Press the code pairing button on the control panel six times, and the LED indicator will flash six times. After theLED indicatorlit, press the button you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.

• Clearing the code : Push the learning button on the receiver 8 secs, the codes will be reset. After clearing the code, remotes will be needto be recalibrated.