Sebury DR300 on tietokoneen USB-porttiin kytkettävä RFID EM/NFC-lukija/kirjoittaja (125kHz / 13.56MHz), joka toimii ilman erillisiä ajureita (HID-yhteensopiva) kaikissa tietokoneissa.

Ominaisuudet:
• Compliant with CCID
• Compliant with PC/SC
• Support IC/ID dual frequency replication
• Driver-free, no need to download software installation
• When connect the RFID Reader to the computer with the USB cable, then can find the software.
• Support ID125K, 8800, 5200, 4305, 5577, 8265 card.
• Support UID FUID CUID UFUID IC semi-encrypted card, Most of IC full encryption card.
• Has USB full speed interface
• Two-color LED light prompt (red light is standby, green isworking)
• Built-in buzzer ”beep” sound reminder

Teknise tiedot:
• Dimensions: 108 (L) X 68 (W) X 12 mm (H)
• Interface: USB full speed
• Working Voltage: 5 VDC
• Working current: 200mA
• Standby current: 50mA
• Normal current: 100mA
• Working frequency: 125KHz / 13.56 MHz
• Smart card support:
– 125KHz ID type: EM4100, TK4100, 8800, 5200, EM4305, T5577, 8265 etc.
– 13.56MHz IC type: UID FUID CUID UFUID, Most of IC Half- encryption, IC Full-encryption etc.
• Supported operating systems: Support Windows computer. Notsupport Linux, Mac.

How to use the card reader? 1. Connect the device to your computer with the USB cable. 2. You can view and open the software on your computer.

Read and write ordinary 125KHz RFID card 1. Place the card on the card reader and press ”Read” on thesoftware to scan the card. 2. The software will scan and display the card number 3. Place a writable T5577 (125KHz writable chip) on the cardreader and press ”Write” on the software.

Read and write 13.56MHz IC, IC half encryption card, IC fullencryption card 1. Place the card on the card reader and press ”Card number”or ”Start decoding” on the software. 2. Place a writable UID (13.56MHz writable chip) on the cardreader and press ”Write Card” on the software.