PLANET IGS-4215-16T2S on teollisuuskäyttöön suunniteltu 18-porttinen hallittava 19″ Ethernet-kytkin laajennetulla käyttölämpötila-alueella. Kytkin on varustettu 16x 10/100/1000Base-T kupariportilla sekä 2x 100/1000M SFP- porteilla.

Tekniset tiedot:
• 16x 10/100/1000BASE-T RJ45 with auto MDI/MDI-X function
• 2x SFP slot interfaces, supporting 100/1000BASE-X SFP transceiver type auto detection
• 1-port RJ45 console interface for basic management and setup
• Dual power input, redundant power with reverse polarity protection
– DC 12 to 48V input or AC 24V input
– Active-active redundant power failure protection
– Backup of catastrophic power failure on one supply
– Fault tolerance and resilience
• IP30 metal case
• DIN-rail and wall-mount designs
• Supports ESD 6KV DC Ethernet protection
• Supports -40…+75 degrees C operating temperature
• Free fall, shock-proof and vibration-proof for industries
• Features Store-and-Forward mode with wire-speed filtering and forwarding rates
• IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
• 8K MAC address table size
• 10K jumbo frame
• Automatic address learning and address aging
• Supports CSMA/CD protocol
• Supports VLAN
– IEEE 802.1Q tagged VLAN
– Up to 256 VLAN groups, out of 4096 VLAN IDs
– Provider bridging (VLAN Q-in-Q, IEEE 802.1ad) support
– Private VLAN (Protected port)
– Protocol-based VLAN
– Voice VLAN
– GVRP
• Supports Spanning Tree Protocol
– IEEE 802.1D Spanning Tree Protocol (STP)
– IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
– IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN
– BPDU Guard
• Supports Link Aggregation
– IEEE 802.3ad Link Aggregation Control Protocol (LACP)
– Cisco ether-channel (static trunk)
– Up to 8 trunk groups
– Up to 8 ports per trunk group with 16Gbps bandwidth
• Provides port mirror (many-to-1)
• IPv6 MAC/VLAN/Multicast Address Table
• Loop protection to avoid broadcast loops
• Ingress/Egress Rate Limit per port bandwidth control
• Support 8 priority queues on all switch ports
• Traffic classification
– IEEE 802.1p CoS
– IP TOS/DSCP/IP precedence of IPv4/IPv6 packets
– IP TCP/UDP port number
– Typical network application
• DSCP remarking
• Supports IPv4 IGMP snooping v1, v2, v3
• Supports IPv6 MLD snooping v1, v2
• Querier mode support
• IGMP snooping port filtering
• MLD snooping port filtering
• Storm Control support
– Broadcast/Multicast/Unicast
• Authentication
– IEEE 802.1X port-based network access authentication
– Built-in RADIUS client to cooperate with the RADIUS servers
– DHCP Relay and DHCP Option 82
– RADIUS/TACACS+ users access authentication
• Access Control List
– IPv4/IPv6 IP-based ACL
– IPv4/IPv6 IP-based ACE
– MAC-based ACL
– MAC-based ACE
• MAC Security
– Static MAC
– MAC filtering
• Port security for source MAC address entries filtering
• DHCP snooping to filter distrusted DHCP messages
• Dynamic ARP inspection discards ARP packets with invalid MAC address to IP address binding
• IP source guard prevents IP spoofing attacks
• IP address access management to prevent unauthorized intruder
• IPv4 and IPv6 dual stack management
• Switch Management Interface
– IPv4/IPv6 Web switch management
– Console and telnet Command Line Interface
– SNMP v1, v2c, v3
– SSH, TLS and SSL secure access
• IPv6 IP address/NTP/DNS management
• Built-in Trivial File Transfer Protocol (TFTP) client
• Static and DHCP for IP address assignment
• System Maintenance
– Firmware upload/download via HTTP/TFTP
– Hardware reset button for system reboot or reset to factory default
– Dual images
• User Privilege levels control
• Network Time Protocol (NTP)
• Link Layer Discovery Protocol (LLDP) and LLDP-MED
• Syslog remote alarm
• SNMP Management
– SNMP trap for interface link up and link down notification
– Four RMON groups (history, statistics, alarms and events) PLANET Smart Discovery Utility for deployment management Network diagnostic
– SFP-DDM (Digital Diagnostic Monitor)
– Cable diagnostic technology provides the mechanism to detect and report potential cabling issues
• ICMPv6 / ICMPv4 remote pin
• Dimensions: 66x107x152mm
• Weight: 813g