PLANET GS-4210-24PL4C on 28-porttinen SNMP-hallittava PoE+ kytkin, jonta 24x 10/100/1000Base-T porttia ovat varustettu PoE+ virransyöttötuella. Kytkimen PoE- virransyöttökapasiteetti on 440W, joka mahdollistaa kaikkiinPoE-portteihin maksimissan 36W tehon. Kytkimessä on lisäksi 4x SFP/TP-porttia valokuitu- ja runkoyhteyksille.

Tuotepakkauksen mukana kytkimen lisäksi virtajohto, asennusohje, RS-232 konsolikaapeli sekä 19″ räkkikiinnikkeet.

Tekniset tiedot:
• 28x 10/100/1000BASE-T @ 24x IEEE 802.3at/af PoE
• 4x 100/1000BASE-X mini-GBIC/SFP slots, shared with port-25to port-28 compatible with 100BASE-FX SFP
• RJ45 console management and setup
• Complies with IEEE 802.3at Power over Ethernet Plus, end- span PSE
• Backward compatible with IEEE 802.3af
• Up to 24 ports of IEEE 802.3af / 802.3at devices powered
• Supports PoE power up to 36 watts for each PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100 meters
• PoE management
– Total PoE power budget control
– Per port PoE function enable/disable
– PoE Port power feeding priority
– Per PoE port power limitation
– PD classification detection
– PD alive-check
– PoE schedule
• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
• High performance Store and Forward architecture, broadcaststorm control, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
• Supports VLAN
– IEEE 802.1Q tagged VLAN
– Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
– Protocol VLAN
– Voice VLAN
– Private VLAN
– Management VLAN
– GVRP
• Supports Spanning Tree Protocol
– STP (Spanning Tree Protocol)
– RSTP (Rapid Spanning Tree Protocol)
– MSTP (Multiple Spanning Tree Protocol)
– STP BPDU Guard, BPDU filtering and BPDU forwarding
• Supports Link Aggregation
– IEEE 802.3ad Link Aggregation Control Protocol (LACP)
– Cisco ether-channel (static trunk)
– Maximum 8 trunk groups, up to 8 ports per trunk group
• Provides port mirror (many-to-1)
• Loop protection to avoid broadcast loops
• Ingress and egress rate limit per port bandwidth control
• Storm control support
– Broadcast / Unknown unicast / Unknown multicast
• Traffic classification
– IEEE 802.1p CoS
– TOS / DSCP / IP precedence of IPv4/IPv6 packets
• Strict priority and Weighted Round Robin (WRR) CoS policies
• Supports IPv4 IGMP snooping v2 and v3
• Supports IPv6 MLD snooping v1, v2
• IGMP querier mode support
• IGMP snooping port filtering
• MLD snooping port filtering
• Authentication
– IEEE 802.1X port-based network access authentication
– Built-in RADIUS client to co-operate with the RADIUS servers
– RADIUS / TACACS+ login user access authentication
• Access control list
– IPv4 / IPv6 IP-based ACL
– MAC-based ACL
• MAC security
• Static MAC
• MAC filtering
• Port security for source MAC address entries filtering
• DHCP snooping to filter distrusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
• IP source guard prevents IP spoofing attacks
• DoS attack prevention
• SSH/SSL
• IPv4 and IPv6 dual stack management
• Switch management interface
– Web switch management
– Telnet command line interface
– SNMP v1, v2c and v3
– SSH and SSL secure access
• User privilege levels control
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System maintenance
– Firmware upload/download via HTTP / TFTP
– Configuration upload / download through web interface
– Dual images
– Hardware reset button for system reboot or reset to factory default
• SNTP Network Time Protocol
• Cable diagnostics
• Link Layer Discovery Protocol (LLDP) and LLDP-MED
• SNMP trap for interface link up and link down notification
• Event message logging to remote Syslog server
• Four RMON groups (history, statistics, alarms and events)
• PLANET smart discovery utility
• Smart fan with speed control