PLANET BSP-360 on teollisuuskäyttöön suunniteltu hallittava Gigabitin kytkin uudistuvan energian virransyötöllä, jossa on 5x 10/100/1000Base-T kupariporttia, joista 4 tukee 802.3at PoE+ -syöttöä (30W/portti, yhteensä 120W).

BSP-360 on osa uusiutuvan energian PoE-järjestelmää ja toimii aurinko-, tuuli- tai vesivoimalla. Se jatkaa PoE- laitteiden toimintaa myös yöllä ulkoisen akkuvarauksen avulla (hankittava erikseen), mahdollistaen IP-kameroiden jalangattomien tukiasemien käytön syrjäisissä kohteissa ilman verkkosähköä.

Laitteen integroitu MPPT-lataussäädin (Maximum Power Point Tracker) hallitsee ulkoisia 24V litium- tai lyijyakkuja. Se toimii DC-DC-muuntimena, joka muuntaa aurinkopaneelien tuottaman jännitteen tehokkaasti akkujen lataukseen ja tukeejopa 400W PV-moduulisyöttöä. Älykäs akkuhallinta valvoo varaustilaa, suojaa alijännitteeltä ja ylläpitää akun täydenlatauksen.

Hallinta onnistuu verkkopohjaisen käyttöliittymän ja SNMP- hallintaprotokollan kautta. Lisäksi BSP-360 voidaan liittää PLANET NMS-360 -hallintajärjestelmään, joka tukee jopa 512 BSP-360-yksikköä ja 2048 PLANET IP-kameraa MQTT- ja ONVIF- protokollien avulla.

Tuotepakkaus sisältää BSP-360-kytkimen, ruuviliittimen virtaliitäntää varten sekä englanninkielisen pikaoppaan.

Tekniset tiedot:
• 5x 10/100/1000BASE-T Gigabit RJ45 copper with 4-port IEEE 802.3at/af PoE injector function (Port 1 to Port 4)
• RJ45 type interface for basic management and setup
• USB type A female for setting file backup and restoration
• Complies with IEEE 802.3at Power over Ethernet Plus end- span PSE
• Backward compatible with IEEE 802.3af Power over Ethernet
• Up to 4 ports of IEEE 802.3af/802.3at devices powered
• Supports PoE power up to 36 watts for each PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100 meters
• PoE management:
– Total PoE power budget control
– Per port PoE function enable/disable
– PoE port power feeding priority
– Per PoE port power limitation
– PD alive check
– PoE schedule
• Battery type option: Lithium battery or lead-acid battery
• Easy diagnostic of the system operating status via LED indicator
• Current battery usage status
• Low voltage cut-off protection: Send alert and cut off power when the battery is low
• MPPT (Maximum Power Point Tracking) Charge Controller:
– Reverse current protection to prevent the current circuitsfrom flowing back to the PV panel
– Over-current protection
– Reverse polarity protection (for battery and charging electrodes)
• IP30 aluminum case
• DIN-rail and wall-mounted designs
• Supports -10 to 60 degrees C operating temperature
• Supports ESD 6KV DC Ethernet protection
• Redundant power supply
• 24…45VDC wide power input
• Hardware-based 10/100Mbps (half/full duplex), 1000Mbps (full duplex), auto-negotiation and auto MDI/MDI-X
• Features Store-and-Forward mode with wire-speed filtering and forwarding rates
• IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
• 8K MAC address table size
• Automatic address learning and address aging
• Internet types: Dynamic IP, static IP, PPPoE, L2TP, PPTP
• Static and dynamic (RIP1 and 2) routing
• IP/MAC-based bandwidth control
• Supports Port Forwarding, DMZ, UPnP and Dynamic DNS for various networking applications
• 802.1d STP and IGMP Proxy
• Port filtering allows which application can access the Internet.
• MAC filtering allows you to include or exclude computers and devices based on their MAC address
• URL filtering allows you to control access to Internet websites in an URL list
• IP source guard prevents IP spoofing attacks
• DoS attack prevention
• Switch Management Interface
– IPv4 Web switch management
– SNMP v1, v2c
• Static and DHCP for IP address assignment
• System Maintenance:
– Firmware upload/download via HTTP
– Configuration upload/download through HTTP
– Hardware-based reset button for system reboot or reset to factory default
• Network Time Protocol
• SNMP trap for Link Up and Link Down notification
• Event message logging to remote syslog server
• Supports PLANET ONVIF IP camera and snapshot function
• PLANET Smart Discovery Utility
• Supports PLANET NMS-360 Network Management Controller
• Battery Information:
– Type:
– Lithium Battery (Default)
– Lead-acid Battery
– FCV:
– Lithium Battery (Default)
– fixed 26.6V
– Lead-acid Battery
– 27.2V (26.0…30.0V)
– ACV:
– Lithium Battery (Default)
– fixed 28.7V
– Lead-acid Battery
– 29.2V (28.0…32.0V)
– LVD (Low Voltage Disconnection):
– Lithium Battery (Default)
– 21.3V (19.6…23.0V)
– Lead-acid Battery
– 22.2V (21.0…23.0V)
– LVR (Low Voltage Reconnection):
– Lithium Battery (Default)
– 24.0V (23.5…25.0V)
– Lead-acid Battery
– 23.5V (23.5…27.0V)
• Dimensions: 86.8 x 107.3 x 152mm
• Weight: 1251g
• Power Requirements:
– PV in: 24…45VDC
– Battery in/out: 24VDC
• Power Consumption/ Dissipation:
– 5.04W / 17.1BTU (Standby without PoE function)
– 6.96W / 23.7BTU (Full load without PoE function)
– 135.36W / 461.5BTU (Full load with PoE function)
• Compliance:
– FCC Part 15 Class A
– CE
– IEEE 802.3 10BASE-T Ethernet
– IEEE 802.3u 100BASE-TX Fast Ethernet
– IEEE 802.3ab 1000BASE-T Gigabit Ethernet
– IEEE 802.3x Flow Control and Back Pressure
– IEEE 802.1D Spanning Tree Protocol
– IEEE 802.3af Power over Ethernet